Enter your email address
Submit
Write your message
Volume 8, Issue 26 (Autumn 2014)
IJT 2014, 8(26): 1114-1123 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Kamarehie B, Asilian Mahabadi H, Joneidi Jafari A. Destruction and Dechlorination of Aroclor1254 in Real Waste Transformer Oil Using Microwave Irradiation, Microwave Absorbent and Reactive Materials. IJT 2014; 8 (26) :1114-1123
URL: http://ijt.arakmu.ac.ir/article-1-346-en.html
URL: http://ijt.arakmu.ac.ir/article-1-346-en.html
1- Department of Environment Health, Lorestan University of Medical , b.kamarehie@gmail.Com
2- Department of Occupational Health, Tarbiat Modares University, Tehran, Iran.
3- Department of Environment Health, Iran Medical Science University, Tehran, Iran.
2- Department of Occupational Health, Tarbiat Modares University, Tehran, Iran.
3- Department of Environment Health, Iran Medical Science University, Tehran, Iran.
Abstract: (5325 Views)
Background: In this research, the decomposition of Aroclor 1254, including 20 kinds of poly chlorinated biphenyls (PCBs), in real waste transformer oil in the presence of PEG1000, NaOH, zero valent iron and H2O by microwave (MW) irradiation was studied.
Methods: Central composites design (CCD) method was carried out for experimental design. The effects of microwave power levels (200- 1000 W), reaction time (30-600 s), polyethylene glycol (PEG) (1.5-7.5 g), zero valent iron powder (0.3-1.5 g), NaOH (0.3-1.5 g) and H2O (0.4-2 ml) were surveyed on the decomposition efficiency of PCBs.
Results: The results specified that polyethylene glycol and NaOH, as reactants, greatly influenced the decomposition of PCBs. Nevertheless, zero valent iron had no effect, and H2O decreased the decomposition efficiency of PCBs. Furthermore, experimental results showed that at the optimum amounts of variables (PEG = 5.34g, NaOH= 1.17g, Fe= 0.6g, H2O= 0.8 ml, microwave power 800 w), 93% of PCBs were decomposed over the reaction duration of 6 min. Therefore, PCBs degradation efficiency without water rose up to 99.99% under the MW at 6 min.
Conclusion: The results indicated that MW, PEG and NaOH were important variables on PCBs degradation from real waste transformer oil. It is therefore suggested that microwave radiation with the assistance of PEG and alkali can be introduced as a potential technology for PCBs removal from real waste PCB-contaminated oil.
Methods: Central composites design (CCD) method was carried out for experimental design. The effects of microwave power levels (200- 1000 W), reaction time (30-600 s), polyethylene glycol (PEG) (1.5-7.5 g), zero valent iron powder (0.3-1.5 g), NaOH (0.3-1.5 g) and H2O (0.4-2 ml) were surveyed on the decomposition efficiency of PCBs.
Results: The results specified that polyethylene glycol and NaOH, as reactants, greatly influenced the decomposition of PCBs. Nevertheless, zero valent iron had no effect, and H2O decreased the decomposition efficiency of PCBs. Furthermore, experimental results showed that at the optimum amounts of variables (PEG = 5.34g, NaOH= 1.17g, Fe= 0.6g, H2O= 0.8 ml, microwave power 800 w), 93% of PCBs were decomposed over the reaction duration of 6 min. Therefore, PCBs degradation efficiency without water rose up to 99.99% under the MW at 6 min.
Conclusion: The results indicated that MW, PEG and NaOH were important variables on PCBs degradation from real waste transformer oil. It is therefore suggested that microwave radiation with the assistance of PEG and alkali can be introduced as a potential technology for PCBs removal from real waste PCB-contaminated oil.
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
The Iranian Journal of Toxicology
Arak University of Medical Sciences in collaboration with the Iranian Society of Toxicology
Website: http://ijt.arakmu.ac.ir
Email: tox.journal@gmail.com
